Minutes, IBIS Quality Committee

19 Jun 2007

11-12 AM EST (8-9 AM PST)

ROLL CALL
  Adam Tambone
  Barry Katz, SiSoft
  Benny Lazer
  Benjamin P Silva
  Bob Cox, Micron
* Bob Ross, Teraspeed Consulting Group
  Brian Arsenault
* David Banas, Xilinx
* Eckhard Lenski, Siemens
  Eric Brock
  Gregory R Edlund
  Hazem Hegazy
  John Figueroa
  John Angulo, Mentor Graphics
  Katja Koller, Siemens
  Kevin Fisher
* Kim Helliwell, LSI Logic
  Lance Wang, IOMethodology
  Lynne Green
* Mike LaBonte, Cisco
  Mike Mayer, SiSoft
* Moshiul Haque, Micron Technology
  Peter LaFlamme
  Radovan Vuletic, Qimonda
  Robert Haller, Enterasys
* Roy Leventhal, Leventhal Design & Communications
  Sherif Hammad, Mentor Graphics
  Todd Westerhoff, SiSoft
  Tom Dagostino, Teraspeed Consulting Group
  Kazuyoshi Shoji, Hitachi
  Sadahiro Nonoyama

Everyone in attendance marked by  *

NOTE: "AR" = Action Required.

-----------------------MINUTES ---------------------------
Mike LaBonte conducted the meeting.

AR Review:

- Bob contact Steve Kaufer about their plans for the -caution flag
  - Steve prefers to keep the flag
  - Atul has no issue

- Bob work with IBIS committee to make ibischk cautions show by default
  - Bob and Mike will bring this up at the IBIS open forum Friday
  - There will be a second caution message related to a bug95 mistake

- Mike contact Michael Mirmak to discuss parser code issues
  - No response yet to an email (Michael Mirmak has been in Asia)
  - Bob and Mike will bring this up at the IBIS open forum Friday

- Mike change 3.3.4 to level 2
  - Done

- Mike delete 3.4.1
  - Done

- Mike write a check about dependencies between [Model Selector]s
  - Done

- Moshiul write a check about documentation of [Model Selector]s
  - Done

New items:

- none

Continued review of IQ specification:

Recent changes to 3.3.4 and 3.4.1 were approved.

3.4.3.	{LEVEL 2} [Model Selector] entries have reasonable descriptions
- We made a few language cleanups.
- Moshiul: DDR3 has external resistor to control termination, for example.

3.4.4.	{LEVEL 2} Default [Model Selector] entries are consistent
- We made a few language cleanups.
- This check makes 3.4.2 obsolete

AR: Mike delete IQ check 3.4.2

Bob noted that [Model Selector] this is not a component feature
- Can't have 2 [Model Selector]s with the same name under separate comps.
- We should make [Model Selector] a separate section (currently 3.4).
- This would become section 4, [Model} would become section 5.
- We would have to find and change references to specific sections 4+.

AR: Mike renumber the IQ spec so that [Model Selector] is new section 4

Roy said that he has cleanup suggestions for the IQ spec.
- He could send those in a document.
- We probably will clean up the document last.

AR: Roy send cleanup suggestions for the IQ spec

David is seeking feedback on his 5/14 email

AR: All review 5/14 email from David Banas and email any feedback

Next week we will review [Receiver Threshold] checks
- Mike noted that 3 of these have no text at all

AR: David consider adding text to 4.2.21, 4.2.23, 4.2.25

Next meeting:

26 Jun 2007
11-12 AM EST (8-9 AM PST)
Phone: 1.877.384.0543 or 1.800.743.7560
Passcode: 90437837

Meeting ended at 12:08 PM Eastern Time.
